## @section Global parameters ## Global container image parameters ## Please, note that this will override the image parameters, including dependencies, configured to use the global value ## Current available global container image parameters: imageRegistry, imagePullSecrets and storageClass ## @param global.imageRegistry Global container image registry ## @param global.imagePullSecrets Global container registry secret names as an array ## @param global.storageClass Global StorageClass for Persistent Volume(s) ## global: imageRegistry: "" ## E.g. ## imagePullSecrets: ## - myRegistryKeySecretName ## imagePullSecrets: [] storageClass: "" ## @section Common parameters ## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set) ## kubeVersion: "" ## @param nameOverride String to partially override dashboard.fullname template (will maintain the release name) ## nameOverride: "" ## @param fullnameOverride String to fully override dashboard.fullname template ## fullnameOverride: "" ## @param commonLabels Labels to be added to all deployed resources ## commonLabels: {} ## @param commonAnnotations Annotations to be added to all deployed resources ## commonAnnotations: {} ## @section Stackspin parameters ## @param imagePullSecrets Specify docker-registry secret names as an array ## image: imagePullSecrets: [] pullPolicy: Always ## Dashboard configuration parameters ## ref: https://open.greenhost.net/stackspin/dashboard ## dashboard: ## Dashboard image version ## ref: https://hub.docker.com/r/bitnami/dashboard/tags/ ## @param image.registry Stackspin image registry ## @param image.repository Stackspin image repository ## @param image.tag Stackspin image tag ## @param image.pullPolicy Stackspin image pull policy ## @param image.pullSecrets Stackspin image pull secrets ## @param image.debug Specify if debug logs should be enabled ## image: registry: open.greenhost.net:4567 repository: stackspin/dashboard/dashboard tag: 0-1-6 ## Specify a imagePullPolicy ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent' ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images ## pullPolicy: IfNotPresent ## Optionally specify an array of imagePullSecrets. ## Secrets must be manually created in the namespace. ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/ ## e.g: ## pullSecrets: ## - myRegistryKeySecretName ## pullSecrets: [] ## @section Service parameters ## Kubernetes service configuration. For minikube, set this to NodePort, elsewhere use LoadBalancer or ClusterIP ## service: ## @param service.type Kubernetes Service type ## type: ClusterIP ## @param service.port Service HTTP port ## port: 80 ## @param service.nodePort Node Ports to expose ## nodePort: "" ## @param service.loadBalancerIP Use loadBalancerIP to request a specific static IP ## loadBalancerIP: "" ## @param service.externalTrafficPolicy Enable client source IP preservation ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip ## externalTrafficPolicy: Cluster ## @param service.annotations Service annotations ## annotations: {} ## @param service.loadBalancerSourceRanges Limits which cidr blocks can connect to service's load balancer ## Only valid if service.type: LoadBalancer ## loadBalancerSourceRanges: [] ## @param service.extraPorts Extra ports to expose (normally used with the `sidecar` value) ## extraPorts: [] ## @param service.nodePorts.http Kubernetes http node port ## Example: ## nodePorts: ## http: ## nodePorts: http: "" ## @param dashboard.extendEslint Whether to read .eslint.json rules extendEslint: false ## @param dashboard.host Stackspin host to create application URLs (include the port if =/= 80) ## host: "" ## @param dashboard.command Custom command to override image cmd ## command: [] ## @param dashboard.args Custom args for the custom command ## args: [] ## @param dashboard.containerSecurityContext Container security context specification ## Example: ## capabilities: ## drop: ## - ALL ## readOnlyRootFilesystem: true ## runAsNonRoot: true ## runAsUser: 1000 ## containerSecurityContext: {} ## Stackspin container's resource requests and limits ## ref: http://kubernetes.io/docs/user-guide/compute-resources/ ## We usually recommend not to specify default resources and to leave this as a conscious ## choice for the user. This also increases chances charts run on environments with little ## resources, such as Minikube. If you do want to specify resources, uncomment the following ## lines, adjust them as necessary, and remove the curly braces after 'resources:'. ## @param dashboard.resources.limits The resources limits for the container ## @param dashboard.resources.requests The requested resources for the container ## resources: ## Example: ## limits: ## cpu: 100m ## memory: 128Mi limits: {} ## Examples: ## requests: ## cpu: 100m ## memory: 128Mi requests: {} ## Stackspin extra options for liveness probe ## WARNING: Stackspin installation process may take up some time and ## setting inappropriate values here may lead to pods failure. ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes ## @param dashboard.livenessProbe.enabled Enable/disable livenessProbe ## @param dashboard.livenessProbe.initialDelaySeconds Delay before liveness probe is initiated ## @param dashboard.livenessProbe.periodSeconds How often to perform the probe ## @param dashboard.livenessProbe.timeoutSeconds When the probe times out ## @param dashboard.livenessProbe.failureThreshold Minimum consecutive failures for the probe ## @param dashboard.livenessProbe.successThreshold Minimum consecutive successes for the probe ## livenessProbe: enabled: true initialDelaySeconds: 10 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## Stackspin extra options for readiness probe ## WARNING: Stackspin installation process may take up some time and ## setting inappropriate values here may lead to pods failure. ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes ## @param dashboard.readinessProbe.enabled Enable/disable readinessProbe ## @param dashboard.readinessProbe.initialDelaySeconds Delay before readiness probe is initiated ## @param dashboard.readinessProbe.periodSeconds How often to perform the probe ## @param dashboard.readinessProbe.timeoutSeconds When the probe times out ## @param dashboard.readinessProbe.failureThreshold Minimum consecutive failures for the probe ## @param dashboard.readinessProbe.successThreshold Minimum consecutive successes for the probe ## readinessProbe: enabled: true initialDelaySeconds: 10 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param dashboard.customLivenessProbe Custom liveness probe to execute (when the main one is disabled) ## customLivenessProbe: {} ## @param dashboard.customReadinessProbe Custom readiness probe to execute (when the main one is disabled) ## customReadinessProbe: {} ## @param dashboard.extraEnvVars An array to add extra env vars ## For example: ## extraEnvVars: ## dashboard: ## - name: DASHBOARD_ELASTICSEARCH_URL ## value: test ## extraEnvVars: [] ## @param dashboard.extraEnvVarsCM Array to add extra configmaps ## extraEnvVarsCM: [] ## @param dashboard.extraEnvVarsSecret Array to add extra environment variables from a secret ## extraEnvVarsSecret: "" ## @param dashboard.extraVolumeMounts Additional volume mounts (used along with `extraVolumes`) ## Example: Mount CA file ## extraVolumeMounts ## - name: ca-cert ## subPath: ca_cert ## mountPath: /path/to/ca_cert ## extraVolumeMounts: [] ## Dashboard backend configuration parameters ## ref: https://open.greenhost.net/stackspin/dashboard-backend ## backend: ## Dashboard image version ## ref: https://hub.docker.com/r/bitnami/dashboard/tags/ ## @param image.registry Stackspin image registry ## @param image.repository Stackspin image repository ## @param image.tag Stackspin image tag ## @param image.pullPolicy Stackspin image pull policy ## @param image.pullSecrets Stackspin image pull secrets ## @param image.debug Specify if debug logs should be enabled ## image: registry: open.greenhost.net:4567 repository: stackspin/dashboard-backend/dashboard-backend tag: 19-integrate-flask-sso-panel-into-dashboard-flask-backend ## Specify a imagePullPolicy ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent' ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images ## pullPolicy: Always ## Optionally specify an array of imagePullSecrets. ## Secrets must be manually created in the namespace. ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/ ## e.g: ## pullSecrets: ## - myRegistryKeySecretName ## pullSecrets: [] # URL to the Ory Kratos API kratosUrl: http://127.0.0.1:8000 oidc: clientId: dashboard clientSecret: ReplaceWithSecret baseUrl: https://sso.stackspin.example.org authorizationBaseUrl: https://sso.stackspin.example.org/oauth2/auth tokenUrl: https://sso.stackspin.example.org/oauth2/token ## Kubernetes service configuration. For minikube, set this to NodePort, elsewhere use LoadBalancer or ClusterIP ## service: ## @param service.type Kubernetes Service type ## type: ClusterIP ## @param service.port Service HTTP port ## port: 80 ## @param service.nodePort Node Ports to expose ## nodePort: "" ## @param service.loadBalancerIP Use loadBalancerIP to request a specific static IP ## loadBalancerIP: "" ## @param service.externalTrafficPolicy Enable client source IP preservation ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip ## externalTrafficPolicy: Cluster ## @param service.annotations Service annotations ## annotations: {} ## @param service.loadBalancerSourceRanges Limits which cidr blocks can connect to service's load balancer ## Only valid if service.type: LoadBalancer ## loadBalancerSourceRanges: [] ## @param service.extraPorts Extra ports to expose (normally used with the `sidecar` value) ## extraPorts: [] ## @param service.nodePorts.http Kubernetes http node port ## Example: ## nodePorts: ## http: ## nodePorts: http: "" ## @param backend.reactAppApiUrl URL to the dashboard-backend API apiUrl: "/api/v1" ## Variables for future use {{{ ## @param backend.username Admin user of the application ## username: user ## @param backend.password password. WARNING: Minimum length of 10 characters ## Defaults to a random 10-character alphanumeric string if not set ## password: "" ## @param backend.existingSecret Name of an existing secret containing the password (ignores previous password) ## The secret should contain the following key: ## backend-password ## existingSecret: "" ## @param backend.email Admin user email of the application ## email: user@example.com ## dashboard SMTP settings ## @param backend.smtp.enabled Enable/disable SMTP ## @param backend.smtp.host SMTP host name ## @param backend.smtp.port SMTP port number ## @param backend.smtp.user SMTP account user name ## @param backend.smtp.password SMTP account password ## @param backend.smtp.protocol SMTP protocol (Allowed values: tls, ssl) ## @param backend.smtp.auth SMTP authentication method ## @param backend.smtp.existingSecret Name of an existing Kubernetes secret. The secret must have the following key configured: `smtp-password` ## smtp: enabled: false host: "" port: "" user: "" password: "" protocol: "" auth: "" existingSecret: "" ## End variables for future use }}} ## @param backend.flaskEnv Overridable flask env for debugging flaskEnv: production ## @param backend.secretKey Flask secret for generating JWT tokens # secretKey: OVERRIDE_ME ## @param backend.command Custom command to override image cmd ## command: [] ## @param backend.args Custom args for the custom command ## args: [] ## @param backend.containerSecurityContext Container security context specification ## Example: ## capabilities: ## drop: ## - ALL ## readOnlyRootFilesystem: true ## runAsNonRoot: true ## runAsUser: 1000 ## containerSecurityContext: {} ## Stackspin container's resource requests and limits ## ref: http://kubernetes.io/docs/user-guide/compute-resources/ ## We usually recommend not to specify default resources and to leave this as a conscious ## choice for the user. This also increases chances charts run on environments with little ## resources, such as Minikube. If you do want to specify resources, uncomment the following ## lines, adjust them as necessary, and remove the curly braces after 'resources:'. ## @param backend.resources.limits The resources limits for the container ## @param backend.resources.requests The requested resources for the container ## resources: ## Example: ## limits: ## cpu: 100m ## memory: 128Mi limits: {} ## Examples: ## requests: ## cpu: 100m ## memory: 128Mi requests: {} ## Stackspin extra options for liveness probe ## WARNING: Stackspin installation process may take up some time and ## setting inappropriate values here may lead to pods failure. ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes ## @param backend.livenessProbe.enabled Enable/disable livenessProbe ## @param backend.livenessProbe.initialDelaySeconds Delay before liveness probe is initiated ## @param backend.livenessProbe.periodSeconds How often to perform the probe ## @param backend.livenessProbe.timeoutSeconds When the probe times out ## @param backend.livenessProbe.failureThreshold Minimum consecutive failures for the probe ## @param backend.livenessProbe.successThreshold Minimum consecutive successes for the probe ## livenessProbe: enabled: true initialDelaySeconds: 10 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## Stackspin extra options for readiness probe ## WARNING: Stackspin installation process may take up some time and ## setting inappropriate values here may lead to pods failure. ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes ## @param backend.readinessProbe.enabled Enable/disable readinessProbe ## @param backend.readinessProbe.initialDelaySeconds Delay before readiness probe is initiated ## @param backend.readinessProbe.periodSeconds How often to perform the probe ## @param backend.readinessProbe.timeoutSeconds When the probe times out ## @param backend.readinessProbe.failureThreshold Minimum consecutive failures for the probe ## @param backend.readinessProbe.successThreshold Minimum consecutive successes for the probe ## readinessProbe: enabled: true initialDelaySeconds: 10 periodSeconds: 10 timeoutSeconds: 5 failureThreshold: 6 successThreshold: 1 ## @param backend.customLivenessProbe Custom liveness probe to execute (when the main one is disabled) ## customLivenessProbe: {} ## @param backend.customReadinessProbe Custom readiness probe to execute (when the main one is disabled) ## customReadinessProbe: {} ## @param backend.extraEnvVars An array to add extra env vars ## For example: ## extraEnvVars: ## backend: ## - name: DASHBOARD_ELASTICSEARCH_URL ## value: test ## extraEnvVars: [] ## @param backend.extraEnvVarsCM Array to add extra configmaps ## extraEnvVarsCM: [] ## @param backend.extraEnvVarsSecret Array to add extra environment variables from a secret ## extraEnvVarsSecret: "" ## @param backend.extraVolumeMounts Additional volume mounts (used along with `extraVolumes`) ## Example: Mount CA file ## extraVolumeMounts ## - name: ca-cert ## subPath: ca_cert ## mountPath: /path/to/ca_cert ## extraVolumeMounts: [] ## @param replicaCount Number of Stackspin & Sidekiq replicas ## (Note that you will need ReadWriteMany PVCs for this to work properly) ## replicaCount: 1 ## @param extraVolumes Array of extra volumes to be added deployment. Requires setting `extraVolumeMounts` ## Example: Add secret volume ## extraVolumes: ## - name: ca-cert ## secret: ## secretName: ca-cert ## items: ## - key: ca-cert ## path: ca_cert ## extraVolumes: [] ## @param sidecars Attach additional sidecar containers to the pod ## Example: ## sidecars: ## - name: your-image-name ## image: your-image ## imagePullPolicy: Always ## ports: ## - name: portname ## containerPort: 1234 ## sidecars: [] ## @param initContainers Additional init containers to add to the pods ## ## e.g. ## initContainers: ## - name: your-image-name ## image: your-image ## imagePullPolicy: Always ## ports: ## - name: portname ## containerPort: 1234 ## initContainers: [] ## @param serviceAccount.create Whether the service account should be created ## @param serviceAccount.annotations Annotations to add to the service account ## @param serviceAccount.name Name to be used for the service account ## serviceAccount: create: false annotations: {} ## If not set and create is true, a name is generated using the fullname template ## name: "" ## @param podSecurityContext Pod security context specification ## Example: ## fsGroup: 2000 ## ## podSecurityContext: {} ## @param hostAliases Add deployment host aliases ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/ ## hostAliases: [] ## Enable persistence using Persistent Volume Claims ## ref: http://kubernetes.io/docs/user-guide/persistent-volumes/ ## persistence: ## @param persistence.enabled Whether to enable persistence based on Persistent Volume Claims ## enabled: false ## @param persistence.storageClass dashboard & sidekiq data Persistent Volume Storage Class ## If defined, storageClassName: ## If set to "-", storageClassName: "", which disables dynamic provisioning ## If undefined (the default) or set to null, no storageClassName spec is ## set, choosing the default provisioner. (gp2 on AWS, standard on ## GKE, AWS & OpenStack) ## storageClass: "" ## @param persistence.existingClaim Use a existing PVC which must be created manually before bound ## existingClaim: "" ## @param persistence.accessMode PVC Access Mode (RWO, ROX, RWX) ## accessMode: ReadWriteOnce ## @param persistence.size Size of the PVC to request ## size: 10Gi ## @param persistence.selector Selector to match an existing Persistent Volume (this value is evaluated as a template) ## selector: ## matchLabels: ## app: my-app selector: {} ## @param updateStrategy.type Update strategy type. Only really applicable for deployments with RWO PVs attached ## If replicas = 1, an update can get "stuck", as the previous pod remains attached to the ## PV, and the "incoming" pod can never start. Changing the strategy to "Recreate" will ## terminate the single previous pod, so that the new, incoming pod can attach to the PV ## Example: ## updateStrategy: ## type: RollingUpdate ## rollingUpdate: ## maxSurge: 25% ## maxUnavailable: 25% updateStrategy: type: RollingUpdate ## @param podAnnotations Additional pod annotations ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/ ## podAnnotations: {} ## @param podLabels Additional pod labels ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/ ## podLabels: {} ## @param podAffinityPreset Pod affinity preset. Allowed values: soft, hard ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity ## podAffinityPreset: "" ## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard` ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity ## podAntiAffinityPreset: soft ## Node affinity preset ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity ## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard` ## @param nodeAffinityPreset.key Node label key to match Ignored if `affinity` is set. ## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set. ## nodeAffinityPreset: type: "" ## E.g. ## key: "kubernetes.io/e2e-az-name" ## key: "" ## E.g. ## values: ## - e2e-az1 ## - e2e-az2 ## values: [] ## @param affinity Affinity for pod assignment ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity ## Note: podAffinityPreset, podAntiAffinityPreset, and nodeAffinityPreset will be ignored when it's set ## affinity: {} ## @param nodeSelector Node labels for pod assignment. ## Ref: https://kubernetes.io/docs/user-guide/node-selection/ ## nodeSelector: {} ## @param tolerations Tolerations for pod assignment. ## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/ ## tolerations: [] ## @section Volume Permissions parameters (currently disabled because there is ## no persistence in the app) ## Init containers parameters: ## volumePermissions: Change the owner and group of the persistent volume mountpoint to runAsUser:fsGroup ## values from the securityContext section. ## volumePermissions: ## @param volumePermissions.enabled Enable init container that changes volume permissions in the data directory (for cases where the default k8s `runAsUser` and `fsUser` values do not work) ## enabled: false ## Init containers' resource requests and limits ## ref: http://kubernetes.io/docs/user-guide/compute-resources/ ## We usually recommend not to specify default resources and to leave this as a conscious ## choice for the user. This also increases chances charts run on environments with little ## resources, such as Minikube. If you do want to specify resources, uncomment the following ## lines, adjust them as necessary, and remove the curly braces after 'resources:'. ## @param volumePermissions.resources.limits The resources limits for the init container ## @param volumePermissions.resources.requests The requested resources for the init container ## resources: ## Example: ## limits: ## cpu: 100m ## memory: 128Mi limits: {} ## Examples: ## requests: ## cpu: 100m ## memory: 128Mi requests: {} ## @section Ingress parameters ## Ingress parameters ## ingress: ## @param ingress.enabled Enable ingress controller resource ## enabled: false ## @param ingress.certManager Add annotations for cert-manager ## certManager: false ## @param ingress.hostname Default host for the ingress resource ## hostname: dashboard.local ## @param ingress.apiVersion Force Ingress API version (automatically detected if not set) ## apiVersion: "" ## @param ingress.path Ingress path ## path: / ## @param ingress.pathType Ingress path type ## pathType: Prefix ## @param ingress.annotations Ingress annotations done as key:value pairs ## For a full list of possible ingress annotations, please see ## ref: https://github.com/kubernetes/ingress-nginx/blob/master/docs/user-guide/nginx-configuration/annotations.md ## ## If certManager is set to true, annotation kubernetes.io/tls-acme: "true" will automatically be set ## annotations: {} ## @param ingress.tls Enable TLS configuration for the hostname defined at ingress.hostname parameter ## TLS certificates will be retrieved from a TLS secret with name: {{- printf "%s-tls" .Values.ingress.hostname }} ## You can use the ingress.secrets parameter to create this TLS secret or relay on cert-manager to create it ## tls: false ## @param ingress.extraHosts The list of additional hostnames to be covered with this ingress record. ## Most likely the hostname above will be enough, but in the event more hosts are needed, this is an array ## extraHosts: ## - name: dashboard.local ## path: / extraHosts: [] ## @param ingress.extraTls The tls configuration for additional hostnames to be covered with this ingress record. ## see: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls ## extraTls: ## - hosts: ## - dashboard.local ## secretName: dashboard.local-tls extraTls: [] ## @param ingress.secrets If you're providing your own certificates, please use this to add the certificates as secrets ## key and certificate should start with -----BEGIN CERTIFICATE----- or ## -----BEGIN RSA PRIVATE KEY----- ## ## name should line up with a tlsSecret set further up ## If you're using cert-manager, this is unneeded, as it will create the secret for you if it is not set ## ## It is also possible to create and manage the certificates outside of this helm chart ## Please see README.md for more information ## Example: ## - name: dashboard.local-tls ## key: ## certificate: secrets: []