service:
  # This token is used to verify issued JWT tokens.
  # Default is a random token which will be generated at each startup of vikunja.
  # (This means all already issued tokens will be invalid once you restart vikunja)
  JWTSecret: "<jwt-secret>"
  # The interface on which to run the webserver
  interface: ":3456"
  # The URL of the frontend, used to send password reset emails.
  frontendurl: ""
  # The base path on the file system where the binary and assets are.
  # Vikunja will also look in this path for a config file, so you could provide only this variable to point to a folder
  # with a config file which will then be used.
  rootpath: <rootpath>
  # The max number of items which can be returned per page
  maxitemsperpage: 50
  # If set to true, enables a /metrics endpoint for prometheus to collect metrics about the system
  # You'll need to use redis for this in order to enable common metrics over multiple nodes
  enablemetrics: false
  # Enable the caldav endpoint, see the docs for more details
  enablecaldav: true
  # Set the motd message, available from the /info endpoint
  motd: ""
  # Enable sharing of lists via a link
  enablelinksharing: true
  # Whether to let new users registering themselves or not
  enableregistration: true
  # Whether to enable task attachments or not
  enabletaskattachments: true
  # The time zone all timestamps are in
  timezone: GMT
  # Whether task comments should be enabled or not
  enabletaskcomments: true
  # Whether totp is enabled. In most cases you want to leave that enabled.
  enabletotp: true
  # If not empty, enables logging of crashes and unhandled errors in sentry.
  sentrydsn: ''

database:
  # Database type to use. Supported types are mysql, postgres and sqlite.
  type: "sqlite"
  # Database user which is used to connect to the database.
  user: "vikunja"
  # Databse password
  password: ""
  # Databse host
  host: "localhost"
  # Databse to use
  database: "vikunja"
  # When using sqlite, this is the path where to store the data
  path: "./vikunja.db"
  # Sets the max open connections to the database. Only used when using mysql and postgres.
  maxopenconnections: 100
  # Sets the maximum number of idle connections to the db.
  maxidleconnections: 50
  # The maximum lifetime of a single db connection in miliseconds.
  maxconnectionlifetime: 10000
  # Secure connection mode. Only used with postgres.
  # (see https://pkg.go.dev/github.com/lib/pq?tab=doc#hdr-Connection_String_Parameters)
  sslmode: disable

cache:
  # If cache is enabled or not
  enabled: false
  # Cache type. Possible values are memory or redis, you'll need to enable redis below when using redis
  type: memory
  # When using memory this defines the maximum size an element can take
  maxelementsize: 1000

redis:
  # Whether to enable redis or not
  enabled: false
  # The host of the redis server including its port.
  host: 'localhost:6379'
  # The password used to authenicate against the redis server
  password: ''
  # 0 means default database
  db: 0

cors:
  # Whether to enable or disable cors headers.
  # Note: If you want to put the frontend and the api on seperate domains or ports, you will need to enable this.
  #       Otherwise the frontend won't be able to make requests to the api through the browser.
  enable: true
  # A list of origins which may access the api.
  origins:
    - "*"
  # How long (in seconds) the results of a preflight request can be cached.
  maxage: 0

mailer:
  # Whether to enable the mailer or not. If it is disabled, all users are enabled right away and password reset is not possible.
  enabled: false
  # SMTP Host
  host: ""
  # SMTP Host port
  port: 587
  # SMTP username
  username: "user"
  # SMTP password
  password: ""
  # Wether to skip verification of the tls certificate on the server
  skiptlsverify: false
  # The default from address when sending emails
  fromemail: "mail@vikunja"
  # The length of the mail queue.
  queuelength: 100
  # The timeout in seconds after which the current open connection to the mailserver will be closed.
  queuetimeout: 30

log:
  # A folder where all the logfiles should go.
  path: <rootpath>logs
  # Whether to show any logging at all or none
  enabled: true
  # Where the normal log should go. Possible values are stdout, stderr, file or off to disable standard logging.
  standard: "stdout"
  # Change the log level. Possible values (case-insensitive) are CRITICAL, ERROR, WARNING, NOTICE, INFO, DEBUG.
  level: "INFO"
  # Whether or not to log database queries. Useful for debugging. Possible values are stdout, stderr, file or off to disable database logging.
  database: "off"
  # The log level for database log messages. Possible values (case-insensitive) are CRITICAL, ERROR, WARNING, NOTICE, INFO, DEBUG.
  databaselevel: "WARNING"
  # Whether to log http requests or not. Possible values are stdout, stderr, file or off to disable http logging.
  http: "stdout"
  # Echo has its own logging which usually is unnessecary, which is why it is disabled by default. Possible values are stdout, stderr, file or off to disable standard logging.
  echo: "off"

ratelimit:
  # whether or not to enable the rate limit
  enabled: false
  # The kind on which rates are based. Can be either "user" for a rate limit per user or "ip" for an ip-based rate limit.
  kind: user
  # The time period in seconds for the limit
  period: 60
  # The max number of requests a user is allowed to do in the configured time period
  limit: 100
  # The store where the limit counter for each user is stored. Possible values are "memory" or "redis"
  store: memory

files:
  # The path where files are stored
  basepath: ./files # relative to the binary
  # The maximum size of a file, as a human-readable string.
  # Warning: The max size is limited 2^64-1 bytes due to the underlying datatype
  maxsize: 20MB

migration:
  # These are the settings for the wunderlist migrator
  wunderlist:
    # Wheter to enable the wunderlist migrator or not
    enable: false
    # The client id, required for making requests to the wunderlist api
    # You need to register your vikunja instance at https://developer.wunderlist.com/apps/new to get this
    clientid:
    # The client secret, also required for making requests to the wunderlist api
    clientsecret:
    # The url where clients are redirected after they authorized Vikunja to access their wunderlist stuff.
    # This needs to match the url you entered when registering your Vikunja instance at wunderlist.
    # This is usually the frontend url where the frontend then makes a request to /migration/wunderlist/migrate
    # with the code obtained from the wunderlist api.
    # Note that the vikunja frontend expects this to be /migrate/wunderlist
    redirecturl:
  todoist:
    # Wheter to enable the todoist migrator or not
    enable: false
    # The client id, required for making requests to the wunderlist api
    # You need to register your vikunja instance at https://developer.todoist.com/appconsole.html to get this
    clientid:
    # The client secret, also required for making requests to the todoist api
    clientsecret:
    # The url where clients are redirected after they authorized Vikunja to access their todoist items.
    # This needs to match the url you entered when registering your Vikunja instance at todoist.
    # This is usually the frontend url where the frontend then makes a request to /migration/todoist/migrate
    # with the code obtained from the todoist api.
    # Note that the vikunja frontend expects this to be /migrate/todoist
    redirecturl:

avatar:
  # Switch between avatar providers. Possible values are gravatar and default.
  #   gravatar will fetch the avatar based on the user email.
  #   default will return a default avatar for every request.
  provider: gravatar
  # When using gravatar, this is the duration in seconds until a cached gravatar user avatar expires
  gravatarexpiration: 3600

backgrounds:
  # Whether to enable backgrounds for lists at all.
  enabled: false
  providers:
    upload:
      # Whethere to enable uploaded list backgrounds
      enabled: false
    unsplash:
      # Whether to enable setting backgrounds from unsplash as list backgrounds
      enabled: false
      # You need to create an application for your installation at https://unsplash.com/oauth/applications/new
      # and set the access token below.
      accesstoken:
      # The unsplash application id is only used for pingback and required as per their api guidelines.
      # You can find the Application ID in the dashboard for your API application. It should be a numeric ID.
      # It will only show in the UI if your application has been approved for Enterprise usage, therefore if
      # you’re in Demo mode, you can also find the ID in the URL at the end: https://unsplash.com/oauth/applications/:application_id
      applicationid: